|
Documentation Support :
|
|
One Technical reference manual[ 15 ]
|
|
|
2. 4 BIT BINARY DOWN COUNTER (RIPPLE) [MODEL : VBET-02]
[TOC]
|
|
|
|
Output LEDs :
|
|
|
5 nos. of LEDs are provided to see the output status of the experiment
All the outputs are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
Inputs :
|
|
5 Nos. of Switches provided for logical input as a high or low with a
LED indication
All the inputs are terminated at a spring termination for easy wiring
|
|
|
|
Counter :
|
|
|
|
This 4 bit binary down counter is constructed using flip flop ICs
Clock is provided on the board with spring termination
One switch is provided for reset the counter
One switch is provided for giving clock to the counter
The mimic diagram of the counter is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "Fiber Cabinet"
|
|
|
Documentation Support :
|
|
One Technical reference manual
[ 17 ]
|
|
|
|
3. 4 BIT BINARY UP COUNTER (SYNCHRONOUS) [MODEL : VBET-03]
[TOC]
|
|
|
|
|
Output LEDs :
|
|
|
5 Nos. of LEDs are provided to indicate the output
status of the experiment.
All the output are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
|
|
Inputs :
|
|
5 Nos. of Switches provided for logical input as a high or
low with a LED indication
All the inputs are terminated at a spring termination for
easy wiring
|
|
Counter :
|
|
|
This 4 bit binary UP counter is constructed using flip flop ICs
Clock is provided on the board with spring termination
One switch is provided for reset the counter
One switch is provided for giving clock to the counter
The mimic diagram of the counter is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "Fiber Cabinet"
|
|
|
Documentation Support :
|
|
One Technical reference manual
[ 18 ]
|
|
|
|
4. 4 BIT BINARY DOWN COUNTER (SYNCHRONOUS) [MODEL : VBET-04] [TOC]
|
|
|
|
|
|
Output LEDs :
|
|
|
5 Nos. of LEDs are provided to indicate the output status of the
experiment
All the output are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
|
Inputs :
|
|
|
Switches provided for logical input as a high or low with a LED
indication
All the inputs are terminated at a spring termination for easy wiring
|
|
|
Counter :
|
|
|
This 4 bit binary Down counter is constructed using flip flop ICs
Clock is provided on the board with spring termination
One switch is provided for reset the counter
One switch is provided for giving clock to the counter
The mimic diagram of the counter is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "Fiber Cabinet"
|
|
|
Documentation Support :
|
|
|
One Technical reference manual[ 20 ]
|
|
|
|
|
|
5. JOHNSON COUNTER [MODEL : VBET-05]
[TOC]
|
|
|
|
|
| Output LEDs :
|
|
|
5 Nos. of LEDs are provided to indicate the output status of the experiment.
All the outputs are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
|
|
Inputs :
|
|
|
5 Nos. of Switches provided for logical input as a
high or low with a LED
indication
All the inputs are terminated at a spring termination
for easy wiring
|
|
| Counter :
|
|
|
This 4 bit johnson counter is constructed using flip flop ICs
Clock is provided on the board with spring termination
One switch is provided for reset the counter
One switch is provided for giving clock to the counter
The mimic diagram of the counter is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "FIBER CABINET"
|
|
|
Documentation Support :
|
|
|
One Technical reference manaul
|
|
|
|
|
|
6. RING COUNTER [MODEL : VBET-06]
[TOC]
|
|
|
|
|
|
Output LED's :
|
|
|
5 Nos. of LEDs are provided to see the output status
of the experiment
All the outputs are terminated at a spring
termination
Drivers are provided to drive the LEDs
|
|
|
|
Inputs :
|
|
|
5 Nos. of Switches provided for logical input as a
high or low with a LED indication
All the inputs are terminated at
a spring termination
for easy wiring
|
|
|
Counter :
|
|
|
This 4 bit ring counter is constructed using flip flop ICs
Clock is provided on the board with spring termination
One switch is provided for reset the counter
One switch is provided for giving clock to the counter
The mimic diagram of the counter is shown on the front side of the PCB.
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "FIBER CABINET"
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual[ 23 ]
|
|
|
|
|
|
7. HALF AND FULL ADDER [MODEL : VBET-07]
[TOC]
|
|
|
|
|
Output LEDs :
|
|
|
5 Nos. of LEDs are provided to see the output status of the experiment.
All the outputs are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
|
Inputs :
|
|
|
5 Nos. of switches provided for logical input as a high or low with a
LED indication
All the inputs are terminated at a spring termination for easy wiring
|
|
|
Added :
|
|
|
This adder kit is constructed using digital ICs
One half added and one full adder is provided
The mimic diagram of the kit is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "FIBER CABINET"
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual
[ 24 ]
|
|
|
|
|
|
8. HALF AND FULL SUBTRACTOR [MODEL : VBET-08]
[TOC]
|
|
|
|
|
|
Output LEDs :
|
|
|
5 Nos. of LEDs are provided to see the output status of the experiment
All the outputs are terminated at a spring termination
Drivers are provided to drive the LEDs
|
|
|
Inputs :
|
|
|
5 Nos. of switches provided for logical input as a high or low with a
LED indication
All the inputs are terminated at a spring termination for easy wiring
|
|
|
Subtractor :
|
|
|
This subtractor kit is constructed using digital ICs
One half subtractor and one full subtractor is provided
The mimic diagram of the kit is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "FIBER CABINET"
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual[ 25 ]
|
|
|
|
|
|
9. 4 BIT BINARY ADDER/SUBTRACTOR [MODEL : VBET-09]
[TOC]
|
|
|
|
|
|
Output LEDs :
|
|
|
5 Nos. of LEDs are provided to see the output status
of the experiment
All the outputs are terminated
at a spring termination
Drivers are provided to drive the LEDs
|
|
|
|
Inputs :
|
|
10 Nos. of Switches provided for logical input as a
high or low with a LED indication
All the inputs are terminated at
a spring termination
for easy wiring
|
|
|
Adder/Subtractor :
|
|
|
This binary adder/subtractor kit is constructed using digital ICs
One binary subtractor and one binary adder is provided
The mimic diagram of the kit is shown on the front side of the PCB
|
|
|
Power Supply :
|
|
|
Built-in power supply
Input : 230V AC
Output : +5V/3A
Mounted on a attractive "FIBER CABINET"
|
|
|
Documentation Support :
|
|
|
One Technical reference manual
[ 26 ]
|
|
|
|
|
|
10. BASIC LOGIC GATES USING DTL LOGIC [MODEL: VBET-10]
[TOC]
|
|
|
|
|
|
Logic Gates :
|
|
|
Basic logic gates like AND, OR, NOT, NOR and NAND gates are designed
using DTL logic
One Solderless breadboard is provided for easy wiring of any
experimental setup
The mimic diagram of the kit is shown on the front side of the PCB.
|
|
|
Inputs :
|
|
|
5 nos. of Switches provided for logical input as a high or low with a
LED indication.
All the inputs are terminated at a spring termination for easy wiring.
|
|
|
Output LED'S :
|
|
|
5 nos. of led's are provided to see the output status of the experiment.
All the outputs are terminated at a spring termination.
Drivers are provided to drive the LED'S.
|
|
|
Power Supply :
|
|
|
Built-in power supply.
Input: 230v AC
Output: +5V/3A
Mounted on an attractive "FIBRE CABINET".
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual
[ 27 ]
|
|
|
|
|
|
11. 4 BIT SHIFT REGISTOR [MODEL:- VBET-11]
[TOC]
|
|
|
|
|
|
Output LED'S :
|
|
|
5 nos. of LED'S are provided to see the output status of the experiment.
All the outputs are terminated at a spring termination.
Drivers are provided to drive the LED'S.
|
|
|
Inputs :
|
|
|
5 nos. of Switches provided for logical input as a high or low with a
LED indication.
All the inputs are terminated at a spring termination for easy wiring.
|
|
|
Shift Register :
|
|
|
This 4 bit shift register is constructed using flip flop IC'S.
CLK is provided on the board with spring termination.
One switch is provided for giving clk to the counter.
One switch is provided for giving clk to the counter.
The various experiments can be done by using this board like Serial in
Serial out, Serial in Parallel Out, Parallel In Parallel Out and Parallel In Serial out
The mimic diagram of the shift register is shown on the front side of
the PCB.
|
|
|
Power Supply :
|
|
|
Built-in power supply.
Input: 230v AC
Output: +5V/3A
Mounted on an attractive "FIBRE CABINET".
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual[ 28 ]
|
|
|
|
|
|
12. 8 BIT PARITY GENERATOR/CHECKER [MODEL:- VBET-12]
[TOC]
|
|
|
|
|
|
Output LED'S :
|
|
|
3 nos. of LED'S are provided to see the output status
of the experiment.
All the outputs are terminated
at a spring termination.
Drivers are provided to drive the LED'S.
|
|
|
|
Inputs :
|
|
|
10 nos. of Switches provided for logical input as a
high or low with a LED indication.
All the inputs are terminated at
a spring termination
for easy wiring.
|
|
| Parity Generator :
|
|
|
Parity is generated and checked using 74180 IC
|
|
| Power Supply :
|
|
|
Built-in power supply.
Input: 230v AC
Output: +5V/3A
Mounted on an attractive "FIBRE CABINET".
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual[ 29 ]
|
|
|
|
|
|
13. 4 BIT MAGNITUDE COMPARATOR [MODEL:- VBET-13]
[TOC]
|
|
|
|
|
|
Output LED'S :
|
|
|
3 nos. of LED'S are provided to see the output status of the experiment.
All the outputs are terminated at a spring termination.
Drivers are provided to drive the LED'S.
|
|
|
Inputs :
|
|
|
10 nos. of Switches provided for logical input as a high or low with a
LED indication.
All the inputs are terminated at a spring termination for easy wiring.
|
|
|
Parity Generator :
|
|
|
The magnitude of two 4 bit binary number are compared using 7485 IC
|
|
|
Power Supply :
|
|
|
Built-in power supply.
Input: 230v AC
Output: +5V/3A
Mounted on an attractive "FIBRE CABINET".
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual
[ 30 ]
|
|
|
|
|
|
14. 8 × 1 MULTIPLEXER AND 1 × 8 DE MULTIPLEXER [MODEL:- VBET-14] [TOC]
|
|
|
|
|
|
Output LED'S :
|
|
|
8 nos. of LED'S are provided to see the output status of the experiment.
All the outputs are terminated at a spring termination.
Drivers are provided to drive the LED'S.
|
|
|
Inputs :
|
|
|
10 nos. of Switches provided for logical input as a high or low with a
LED indication.
All the inputs are terminated at a spring termination for easy wiring.
|
|
|
Multiplexer :
|
|
|
The basic concept of multiplexer is explained in this board using 74151
IC
The basic concept of demultiplexer is explained in this board using
74138 IC
|
|
|
Power Supply :
|
|
|
Built-in power supply.
Input: 230v AC
Output: +5V/3A
Mounted on an attractive "FIBRE CABINET".
|
|
|
Documentation Support :
|
|
|
One Technical reference Manual [ 31 ]
|
|
|
|
