This trainer is designed & fabricated to design and testing of fluid power circuit to control a double action Hydraulic cylinder for velocity, direction and force of the cylinder. Many hydraulic components are provided in this trainer to conduct many fluid power circuits related experiments.

     This trainer consists of many components like one Hydraulic power pack for generating pressurized oil, One DC Valve, 2 Nos. of flow control valve for speed control of piston of the cylinder.

One Powder coated Tank to house oil of 25lts-35lts with level indicator

On the Top of the Tank all the hydraulic Components are mounted for easy access of components for conducting experiments.

 One AC motor with Hydraulic gear pump provided to pump the oil with high pressure.

The 2 outlets are connected to the hydraulic cylinder.

DC solenoid valve can also be operated manually

The input pressure of the inlet oil from the gear pump can be set manually.

One check valve for non-return of oil

One Relief valve for releasing extra oil pressure

2 Nos. of flow control valve provided to control the speed of Hydraulic cylinder manually.

One Double acting Hydraulic cylinder with 40mm bore size,30mm Piston dia & 150mm stroke length

One Limit switch provided to count the piston stroke and displayed in a counter

1b. LOAD SET UP WITH LOAD CELL TO MEASURE DIRECTION,SPEED, VELOCITY & FORCE

A Rigid metallic frame fixed with a Hydraulic cylinder horizontally

Two sensors with signal conditioner provided to sense the minimum & maximum stroke to calculate speed, velocity & direction

A compression type load cell set up provided at the maximum stroke of Hydraulic cylinder to measure force.

# A load cell signal conditioner provided to interface with ADC

Two solenoid with direction control valves study the actuator direction

A Microcontroller, ADC,Relay driver provided to actuate the cylinder electronically while force & direction study