|
8031/51Trainer
Kits [Micro 51EB LED] |
|
|
8031/51 Trainer
Kits [Micro 51 EB LED] |
|
|
8031/51 Trainer
Kits [Micro-51 EB LCD] |
|
|
8031/51 Trainer
Kits [Micro-51 LC LCD] |
|
|
68HC11
Trainer Kit [Micro-68 HC11LED] |
|
|
89C51
Trainer Kit |
|
|
Micro
89C51 EB LED(R4) |
|
|
Micro-89C51
EB LCD(R4) |
|
|
|
|
|
|
 |
|
8031/51
MICROCONTROLLER TRAINER KITS: [Model : Micro-51 eb (LED Version)]
|
| Features |
|
- 80(C)51 Microcontroller at 12 MHz or equivalent
- 8 K Bytes of EPROM expandable to 32 K Bytes.
- 8 K Bytes of RAM expandable to 32 K Bytes with battery backup
- Onchip RS232 Compatible Serial Interface terminated in a 9 Pin 'D' Male Connector
- 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors
- All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus)
- All connections of the Microcontroller are terminated in a separate connector for expansion.
|
 |
|
|
| 8031/51
MICROCONTROLLER TRAINER KIT [Micro-51 LC (LED)] |
| Features |
|
- 8051 / 89C51 Microcontroller, 12MHz Clock speed
- Program Memory RAM - 32KB
- Data Memory RAM - 32KB
- Program Memory EPROM - 32KB
- One no. of 8255 connections are terminated in one 26-pin FRC header (24 I/O lines)
- One VXT-Bus (50 pin FRC connector) for interfacing Microcontroller port lines terminated with one 40-pin FRC header
- On board 8-digital
I/O's can be given
- The port lines PI used as input (switch) or output LED (selectable hardware)
|
 |
|
 |
| 8031/51
MICROCONTROLLER
TRAINER KITS: [Model : Micro-51 eb (LCD Version)] |
| Features |
|
- 80(C)51 Microcontroller at 12 MHz or equivalent
- 8 K Bytes of EPROM expandable to 32 K Bytes.
- 8 K Bytes of RAM expandable to 32 K Bytes
- Onchip RS232 Compatible Serial Interface terminated in a 9 Pin 'D' Male Connector
- 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors
- All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus).
- All connections of the Microcontroller are terminated in a separate connector for expansion.
|
 |
|
 |
| 8031/51
MICROCONTROLLER TRAINER KIT [Micro-51 LC (LCD)] |
| Features |
|
- 8051 / 89C51 Microcontroller, 12MHz Clock speed
- Program Memory RAM - 32KB
- Data Memory RAM - 32KB
- Program Memory EPROM - 32KB
- One VXT-Bus (50 pin FRC connector) for interfacing
- Microcontroller port lines are terminated with one 40-pin FRC header
- On board 8-digital I/O’s can be given
- The port lines PI used as input (switch) or output LED (selectable hardware)
|
 |
|
 |
| 89C51 MICROCONTROLLER TRAINER KIT [Model : MICRO-89C51 EB LED]
|
| Features |
|
- 8051/89C51 Microcontroller operating at 12 Mhz
- 64KB on-chip internal Flash EEPROM program memory
- 64KB External Data RAM
- 32KB EPROM
- 32KB RAM for Program/Data memory
- RS232/RS485 compatible serial interface terminated at 9 pin 'D' male connector
- Onchip Programmable Counter Array (PCA) PCA Contains five 16 bit PWM/capture/compare output
- 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors
- All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus) for
Interfacing.
- All connections of the Microcontroller are terminated in a separate connector for expansion.
- Windows based In System Programming Software for Flash Memory programming
|
 |
|
 |
| 89C51 MICROCONTROLLER TRAINER KIT [Model : MICRO-89C51 EB LCD]
|
| Features |
|
- 8051/ 89C51 Microcontroller operating at 12 Mhz
- 64KB on-chip internal Flash EEPROM program memory
- 1KB on-chip data RAM
- 64KB External Data RAM
- 32KB EPROM for monitor program
- 32KB RAM for Program/Data memory
- Onchip Programmable Counter Array (PCA) PCA Contains five 16 bit PWM/capture/compare output
- 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors
- All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus) for
Interfacing.
- All connections of the Microcontroller are terminated in a separate connector for expansion.
|
 |
|
 |
| 68HC11 Microcontroller Trainer Kit [Model : M-68HC11 eb LED] |
| Features |
|
- Motorola 68HC11 Microcontroller @ 8 MHz
- 8K bytes of On-chip ROM
- 512K bytes of on-chip EEPROM
- 256 bytes of On-chip RAM
- 32K bytes of EPROM for monitor program (External)
- 24K bytes of RAM for user application
- On-chip RS232 serial interface terminated
- 48 TTL I/O lines using 8255 terminated in two 26 pin FRC connector
- All CPU lines like address, data and control signals and port lines are terminated in a 50 pin FRC connector
- 8 Channel 8 bit ADC
- Input Range : 0 to 5V
- 16 bit Timer system
- 3 input
/5 output capture channels
- Synchronous serial peripheral interface
- Real time Interrupt circuit
|
 |
|
|