8Bit Microprocessor Trainers

Microprocessor

		8 Bit Microprocessor Trainers

		16 Bit Microprocessor Trainers

		Universal trainer development System

		56 Models µps

8 Bit Microprocessor Trainers

8085 EB Trainer [ MICRO 85 eb-II]

8085 MICROPROCESSOR TRAINER: [Model : MICRO 85 eb-II]

Features :
Intel 8085A CPU @ 6.144 MHz Clock speed. RAM : 8KB expandable to 32KB, Jumper selectable. EPROM : 8KB expandable to 32KB, Jumper selectable. 3 Channel 16 bit counter / timer terminated in a 10 Pin Connector. 48 TTL I/O Lines, terminated at 26 pin FRC connector RS232C Compatible serial Port terminated in a 9 Pin "D" Male Connector. One VXT Bus (50 Pin FRC Connector) for interfacing. Interrupts, SID and SOD are terminated in a separate 5 Pin Connector.

ADDITIONAL ON BOARD FEATURES:
Additional on board hardware provided on Micro-85ebII to study the behavior of all Interrupt lines of 8085 CPU. These hardware supports the single byte and multi byte Interrupt Instruction of INTR. The hardware provided enable the student to study the execution of each Instructions by one machine cycle by cycle.

8085 LOW COST MICROPROCESSOR TRAINER [MICRO-85 LC]

Features :
Intel 8085A CPU @ 6.144 MHz Clock speed. RAM : 8KB expandable to 32KB, Jumper selectable. EPROM : 8KB expandable to 32KB, Jumper selectable. One No. of 8155/8255 connections are terminated in one 26 pin FRC header (22/24 I/O lines respectively) One VXT Bus (50 Pin FRC Connector) for interfacing VBMB series of Experiment boards and bus expansion. On board 8 digital I/O’s can be given.

8085 MICROPROCESSOR TRAINER KIT [MODEL: MICROPOWER-I LED]

Features :
Intel 8085A CPU on board @ 6.144 MHz Clock speed. 8 KB EPROM 8 KB Static RAM Provision to upgrade RAM/EPROM upto 64 KB EPROM Programmer to program 2716 to 27256 fully software controlled 8 Nos. of interrupt lines brought out to a 10 pin connector On board 8 Channel 8 bit A/D Convertor On board 1-Channel 8 bit D/A Convertor

8085 MICROPROCESSOR TRAINER KIT [MODEL: MICROPOWER-I LCD]

Features :

Intel 8085A CPU on board @ 6.144 MHz Clock speed.
8 KB EPROM
8 KB Static RAM
Provision to upgrade RAM/EPROM upto 64 KB
48 TTL I/O lines brought out to 2 Nos of 26 pin Male FRC Connectors
One RS232C Serial Port brought out to a 9 pin 'D' Male Connector.
One Centronics compatible parallel Printer port brought on to a 25 pin 'D' Female connector
3-channel 16 bit Timer/Counter brought out to a 10 pin connector
Fully buffered address data and control signals terminated at a 50 pin header (VXT BUS) for interfacing VBMB Series of experiment boards and bus expansion.
EPROM Programmer to program 2716to 27256 fully software controlled

Z80 MICROPROCESSOR TRAINER: [Model : MICRO-Z80 LC]

Features :
Zilog Z80A CPU @ 4 MHz clock speed. 8 K Bytes EPROM, up gradable to16 K Bytes. 8 K Bytes Static RAM expandable to 56 K Bytes. 3 Channel 16 bit counter/timer. 24 TTL I/O lines brought on to a 26 pin male FRC Connector.

Z80 MICROPROCESSOR ADVANCE TRAINER: [Model : MICRO-Z80 PF I]

Features :

Zilog Z80A CPU @ 4 MHz clock speed.
8 K Bytes EPROM, upgradable to 16 K Bytes.
8 K Bytes Static RAM expandable to 56 K Bytes .
3 Channel 16 bit counter/timer.
48 TTL I/O lines expandable to 72 I/O lines brought on to two 26 Pin Male FRC Connector.
One RS232C Serial Port brought on to a 9 Pin 'D' Male Connector.
On Board EPROM PROGRAMMER to program EPROMS 2716 fully software controlled.
Datacom communication package for IBM PC to link PC and the Kit.
Centronics Printer Cable.

MC 6800 MICROPROCESSOR TRAINER: [Model : MICRO-6800]

Features :
Motorola 6800 CPU @ 1 Mhz. 16K bytes of Monitor EPROM. 8K bytes of Static RAM Expandable to 32K. All Address, Data and control signals are terminated in a 50 Pin FRC connector for user expansion. 3 Channel, 16 bit Timer/Counter terminated in a 10 Pin Connector. RS232C compatible serial port terminated in a 9 Pin 'D' Male Connector.