|
|
|
|
MICRO WAVE TRAINER
|
Microwave Source Network Analyzer : 2 - 3GHz (VRFT-03C)
|
|
|
Microwave Source Network Analyzer operates over a frequency range of 2 – 3.0GHz with a power Output of 10mW (with variable Attenuator) and is ideal for performing laboratory experiments. The source has several modes of operation like Graphics Display, Directional Coupler to give network Analyzer capabilities as noted below.
|
|
|
a). Frequency
|
|
b). Power output
|
|
c). Operating modes
|
|
d). Directional Coupler Provided
|
|
|
Specification
[TOC]
|
|
a). Frequency
|
|
Range : 2 GHz to 3 GHz
Accuracy : +/- 50 MHz
|
|
|
b). Power output
[TOC]
|
|
RF power output : 10mW (min) over 2 to 3.0GHz.
RF level control : 15 dB min. adjustable
|
|
c). Operating modes
[TOC]
|
|
Sweep mode : Internal sweep, rate adjustable from 10Hz to 500 Hz, Sweeps 2 GHz to 3 GHz in one sweep output available at connector.
CW mode : Power output with 5dBm, 10dBm, 20dBm & 40dBm attenuator.
Internal AM : Square wave modulation Modulation frequency controllable from 100Hz to 5KHz. 1 KHz modulation frequency preset available for Measurements using VSWR meter.
Internal FM : Triangular wave FM modulation, modulation frequency 100Hz to 5 KHz adjustable with a frequency Deviation of approximately 1 MHz (factor setting).
Operating temperature : 0 to 45 C
Humidity : 0 to 90% (no condensation)
Signal connectors : RF output – N(F)
Graphical display : 240 x 128 pixel resolution to plot the characteristics of filter, Amplifier etc. Return loss characteristics, VSWR Measurement and many features available in a network analyzer.
RF Level Detector : 2 – 3.0 Ghz
|
|
d). Directional Coupler Provided
|
|
# Frequency Range: 2 – 3.0 GHz
# Measurements : Return loss, VSWR, impedance of unknown load. VSWR Pattern Display
|
|
|
|
|
|
|
|
|
|
|
|
|
