POWER ELECTRONICS ACCESSORIES

POWER ELECTRONICS

		SCR RELATED TRAINERS

		IGBT / MOSFET RELATED PRODUCT

		OTHER PRODUCTS

		POWER ELECTRONICS ACCESSORIES

POWER ELECTRONICS TRAINERS

POWER ELECTRONICS ACCESSORIES

1. LOW VOLTAGE ACCESSORIES

2. HIGH VOLTAGE ACCESSORIES

1. LOW VOLTAGE ACCESSORIES [TOC]

A. Resistive Load (PEC-LV ACC1)
B. Inductive Load ( PEC-LV ACC2)
C. Motor Load ( PEC-LV ACC3)

A. RESISTIVE LOAD (PEC-LV ACC1) [TOC]

1. RESISTIVE LOAD ( PEC-LV ACC1A)
50 Ohm / 4amp rating Variable type, Single phase AC or DC input Tubular type.
2. RESISTIVE LOAD ( PEC - LV ACC1B)
220 Ohm / 2amp rating Variable type, Single phase Tubular type

B. INDUCTIVE LOAD ( PEC-LV ACC2) [TOC]

120Mh , 4Amp Rating Single phase inductive load With 0,15,30,45,60,75,90,120mH tapping Iron core type. Banana connector provided for all inputs

C. MOTOR LOAD ( PEC-LV ACC3) [TOC]

1. 12V PMDC MOTOR LOAD ( PEC LV ACC3A)
	Volt 12V DC Amp 1.5A Dc Torque - 1kgcm Speed 1500 rpm Double side shaft extension Speed sensor with digital speed indicator
2. 24V PMDC MOTOR LOAD ( PEC LV ACC3B)
Volt 24v dc Amp 1.25a dc Torque-1kgcm Speed 1500 rpm Double side shaft extension Speed sensor with digital speed indicator
3. 12V AC SERVO MOTOR LOAD ( PEC LV ACC3C)
Power 10w Volt 12v AC ( Control winding voltage) Speed 2500 rpm Double side shaft extension Speed sensor with digital speed indicator

2. HIGH VOLTAGE ACCESSORIES [TOC]

A. Resistive Load (PEC-HV ACC1)

B. Inductive Load ( PEC-HV ACC2)

C. Motor Load ( PEC HV ACC3)

A. RESISTIVE LOAD(PEC-HV ACC1) [TOC]

1. SINGLE PHASE LOADING RHEOSTAT( PEC HV ACC1A)

Features
1kw rating Single phase input Different selector switch provided for current selection. Fuse provided for input protection. All are mounted on a moveable cabinet. Banana connector provided for load input
2. SINGLE PHASE LOADING RHEOSTAT ( PEC HV ACC1B)
3kw rating Single phase input Different selector switch provided for current selection. Fuse provided for input protection. All are mounted on a moveable cabinet. Banana connector provided for power input.
3. THREE PHASE LOADING RHEOSTAT ( PEC HV ACC1C)
1kw rating Three phase input Different selector switch provided for current selection. Fuse provided for input protection. All are mounted on a moveable cabinet. Banana connector provided for load input
4. THREE PHASE LOADING RHEOSTAT ( PEC HV ACC1D)
3kw rating Three phase input Different selector switch provided for current selection. Fuse provided for input protection. All are mounted on a moveable cabinet. Banana connector provided for load input

B. INDUCTIVE LOAD ( PEC-HV ACC2) [TOC]

1. SINGLE PHASE INDUCTIVE LOAD ( PEC HV ACC2A)

5AMP capacity

Variable type

Single phase input.

Banana connector provided for input.

Fuse provided for protection.

2. THREE PHASE INDUCTIVE LOAD ( PEC HV ACC2B)
	5AMP capacity Variable type Three phase input. Banana connector provided for input. Fuse provided for protection.

C. MOTOR LOAD ( PEC HV ACC3) [TOC]

	1 hp dc shunt motor spring balance load set-up [ PEC HV ACC3A] 1 hp dc shunt motor generator load set-up [PEC HV ACC3B] 1 hp dc shunt motor eddy current load set-up [PEC HV ACC3C]
1 hp 440vdc shunt motor spring balance load set-up [PEC HV -ACC3D] 1 hp 440vdc shunt motor generator load set-up [PEC HV-ACC3E] 1 hp 440v dc shunt motor eddy current load set-up [ PEC HV ACC3F] 1 hp dc series motor spring balance load set-up [ PEC HV ACC3G] 1hp dc series motor generator load Set up [PEC HV ACC3H] 1 hp dc series motor eddy current load set-up [PEC HV ACC3I] 3 hp dc shunt motor spring balance load set-up [PEC HV ACC3M] 3 hp dc shunt motor generator load set-up [PEC HV ACC3N] 3 hp dc shunt motor eddy current load set-up [PEC HV ACC3O] 1 hp single phase ac motor motor spring balance load set-up [PEC HV ACC3P] 1 hp single phase acmotor, dc generator load set-up [PEC HV ACC3Q] 1 hp single phase ac motor, eddy current load set-up [PEC HV ACC3R] 1 hp three phase ac motor motor spring balance load set-up [PEC HV ACC3S] 1 hp three phase acmotor, dc generator load set-up [PEC HV ACC3T] 1 hp three phase ac motor, eddy current load set-up [PEC HV ACC3U] 3 hp slip ring motor spring balance load set-up [PEC HV ACC3V] 3 hp slip ring motor generator load set-up [ PEC HV ACC3W] 3 hp slip ring motor eddy current load set-up [ PEC HV ACC3X] 1 hp pmdc motor spring balance load set-up [ PEC HV ACC3J] 1 hp pmdc motor generator load set-up [ PEC HV ACC3K] 1 hp pmdc motor eddy current load set-up [PEC HV ACC3L]

1. 1 HP DC MOTOR LOAD SET-UP ( PEC HV ACC3A) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw) Armature voltage 180vdc.5.1amp Field voltage 220vdc,0.3amp Speed 1500 rpm Double side shaft extension. Make benn

2. 1 HP DC MOTOR GENERATOR LOAD SET-UP ( PEC HV ACC3B) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw),shunt type Armature voltage 180vdc.5.1amp Field voltage 220vdc,0.3amp Speed 1500 rpm Double side shaft extension. Make benn
Dc generator spec:
Power 1hp(.6kw),shunt type Armature voltage 180vdc,2.7amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate.

3. 1 HP DC MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3C) [TOC]

The switching characteristics of the device SIT can be studied using this module.
	This set up consists of one number of (1) dc shunt motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Dc motor spec:
Power 1hp(.75kw) Armature voltage 180vdc.5.1amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Eddy current load set-up:
1 hp rating 0-80v.1amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate.

4. 440V DC MOTOR LOAD SET-UP ( PEC HV ACC3D) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw) Armature voltage 440vdc.2amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn

5. 440V DC MOTOR GENERATOR LOAD SET-UP ( PEC HV ACC3E) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw),shunt type Armature voltage 440vdc.2amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate

6. 440 DC MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3F) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator

Dc motor spec:
Power 1hp(.75kw) Armature voltage 44vdc.2amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Eddy current load set-up:
1 hp rating 0-80v.1amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate.

7. 1 HP PMDC MOTOR LOAD SET-UP (PEC HV ACC3J) [TOC]

This set up consists of one number of (1) pmdc motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Pmdc motor spec:
Power 1hp(.75kw).pmdc motor Armature voltage 180vdc.5amp Speed 1500 rpm
Double side shaft extension.
Make pranshu

8. 1 HP PM DC MOTOR GENERATOR LOAD SET-UP ( PEC HV ACC3K) [TOC]

This set up consists of one number of (1) pmdc motor coupled with (2) 1 HP pmdc generator act as load with (3) digital speed indicator
Pmdc motor spec:
Power 1hp(.75kw).pmdc motor Armature voltage 180vdc.5amp Speed 1500 rpm
Double side shaft extension.
Make pranshu
Pmdc generators
Power 1hp(.75kw).pmdc motor act as generator Armature voltage 180vdc.5amp Speed 1500 rpm
Double side shaft extension.
Make pranshu
Both motor and generator are coupled with base plate

9. 1 HP PMDC MOTOR EDDY CURRENT LOAD SET-UP( PEC HV ACC3L) [TOC]

This set up consists of one number of (1) pmdc motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Pmdc motor spec:
Power 1hp(.75kw).pmdc motor
Armature voltage 180vdc.5amp Speed 1500 rpm
Double side shaft extension.
Make pranshu
Eddy current load set-up:
1 hp rating 0-80v.1amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate.

10. 1 HP DC SERIES MOTOR LOAD SET-UP ( PEC HV ACC3G) [TOC]

This set up consists of one number of (1) dc series motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw) Armature voltage 220vdc ,4amp Speed 1500 rpm
Double side shaft extension
Make benn

11. 1 HP DC SERIES MOTOR GENERATOR LOAD SET-UP ( PEC HV ACC3H) [TOC]

This set up consists of one number of (1) dc series motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Dc motor spec:
Power 1hp(.75kw),series type Armature voltage 220vdc.4amp Speed 1500 rpm
Double side shaft extension.
Make benn
Dc generator spec:
Power 1hp(.6kw),shunt type Armature voltage 180vdc,2.7amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate.

12. 1 HP DC SERIES MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3I) [TOC]

This set up consists of one number of (1) dc series motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Dc motor spec:
Power 3hp(1.8kw),shunt type Armature voltage 180vdc,7amp Field voltage 220vdc,0.8amp Speed 1500 rpm Double side shaft extension. Make benn
Both motor and generator are coupled with base plate.

15. 3 HP DC MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3C) [TOC]

This set up consists of one number of (1) dc shunt motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Dc motor spec:
Power 3hp(2.2kw) Armature voltage 180vdc.15.1amp Field voltage 220vdc,0.8amp Speed 1500 rpm
Double side shaft extension.
Make benn
Eddy current load set-up:
3 hp rating 0-80v,3amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate.

16. 1 HP SINGLE PHASE INDUCTION MOTOR LOAD SET-UP ( PEC HV ACC3M)[TOC]

This set up consists of one number of (1) single phase ac motor motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Ac motor spec:
Power 1hp
Single phase permanent capacitor type 230vac, 50hz input
Speed 1400 rpm
Speed sensor with speed indicator

17. 1 HP AC MOTOR GENERATOR LOAD SET-UP ( PEC HV ACC3B) [TOC]

This set up consists of one number of (1) ac motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Ac motor spec:
Power 1hp
Single phase permanent capacitor type 230vac, 50hz input
Speed 1400 rpm
Speed sensor with speed indicator
Dc generator spec:
Power 3hp(1.8kw),shunt type Armature voltage 180vdc,7amp Field voltage 220vdc,0.8amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate.

18. 1 HP AC MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3C) [TOC]

This set up consists of one number of (1) ac shunt motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Ac motor spec:
Power 1hp
Single phase permanent capacitor type 230vac, 50hz input
Speed 1400 rpm
Eddy current load set-up:
1 hp rating 0-80v,3amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator
Both motor and eddy set-up coupled with base plate.

19. 1 HP THREE PHASE MOTOR LOAD SET-UP ( PEC HV ACC3M) [TOC]

This set up consists of one number of (1) three phase ac motor motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 1hp(.75kw) Current 1.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm Make: siemens/benn
Speed sensor with speed indicator

20. 1 HP THREE PHASE AC MOTOR GENERATOR SET-UP (PEC HV ACC3B) [TOC]

This set up consists of one number of (1) three phase ac motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 1hp(.75kw) Current 1.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm
Speed sensor with speed indicator.
Make: siemens/benn
Dc generator spec:
Power 1hp(.6kw),shunt type Armature voltage 180vdc,5amp Field voltage 220vdc,0.3amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate

21. 1 HP THREE PHASE AC MOTOR EDDY CURRENT LOAD SET-UP (PEC HV ACC3C) [TOC]

This set up consists of one number of (1) ac motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 1hp(.75kw) Current 1.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm Make: siemens/benn
Eddy current load set-up:
1 hp rating 0-80v,3amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate

22. 3 HP THREE PHASE MOTOR LOAD SET-UP ( PEC HV ACC3M) [TOC]

This set up consists of one number of (1) three phase ac motor coupled with (2) mechanical spring balance load set-up with (3) digital speed indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 3hp(2.2kw) Current 4.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm Make: siemens/benn
Speed sensor with speed indicator

23. 3 HP THREE PHASE AC MOTOR GENERATOR SET-UP ( PEC HV ACC3B) [TOC]

This set up consists of one number of (1) three phase ac motor coupled with (2) 1 HP dc shunt generator act as load with (3) digital speed indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 3hp(2.2kw) Current 4.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm Make: siemens/benn
Speed sensor with speed indicator
Dc generator spec:
Power 3hp(1.8kw),shunt type Armature voltage 180vdc,7amp Field voltage 220vdc,0.8amp Speed 1500 rpm
Double side shaft extension.
Make benn
Both motor and generator are coupled with base plate.

24. 3 HP THREE PHASE AC MOTOR EDDY CURRENT LOAD SET-UP ( PEC HV ACC3C) [TOC]

This set up consists of one number of (1) ac motor coupled with (2) eddy current load set-up with (3) digital speed and torque indicator
Ac motor spec:
Three phase squirrel cage induction motor.
Power 3hp(2.2kw) Current 4.8amp,star connection three phase 415vac 50hz input Speed 1390 rpm Make: siemens/benn
Eddy current load set-up:
3 hp rating 0-80v,3amp current rating 1500 rpm speed Electronic dc voltage controller provided for torque variation Torque sensor with torque indicator Speed sensor with speed indicator Both motor and eddy set-up coupled with base plate.

25. 3 HP SLIP RING MOTOR SET UP [TOC]

This motor set up consists of
Slip ring motor Digital speed indicator Load set-up coupled with motor for torque variation.
1. Slip ring motor
Type : Three phase slip ring induction motor. Power : 3hp(2.2kw) Stator voltage: Three phase 415vac,4amp Rotor voltage : Three phase 210v ac,6amp Speed : 1410 rpm Make: : Benn
2. Digital speed indicator
One number of MOC7811 IC used for speed sensing Slotted disc fixed with motor shaft. PIC micro controller used for speed display One number of 16*4 LCD provided for speed indication.
3. Load set-up
Spring balance load set-up Generator load set-up Eddy current load set-u
1. Spring balance load set-up:
One number of aluminum brake drum fixed with motor shaft Two number of spring balance provided for load measurement in Kg One number mechanical arrangement with belt & two hand wheel arrangement provided for motor load variation. Motor torque can be calculated using drum radius & load Kg .
2. Generator load set-up
One number of dc generator coupled with motor shaft using fluxibile coupling Both motor and generator fixed with iron base plate Generator spec:
Type dc shunt generator Power: suitable for motor rating Armature voltage: 0-200vdc Field voltage: 0-200vdc Speed : 1500rpm.
Double side shaft extension.
3. Eddy current load set-up:
One number of eddy current brake coupled with motor shaft using flexible coupling Both motor and eddy current brake fixed with base plate. Eddy current brake spec:
Type: non-contact able magnetic principle Power: suitable for motor rating Operating voltage: 0-80vdc,1/3amp Speed : 0-3000rpm One number of dc voltage regulator for torque variation One number of spring balance with dial coupled with other Side of shaft for load indication in Kg One number of shaft arm connected between spring balance and -Motor shaft. Motor torque can be calculated using shaft arm length & spring balance - reading in Kg.


Copyrights © 2005.