- PROGRAMMABLE LOGIC CONTROLLER
- MECHANICAL
- Thermal Lab
- Robotics Lab
- Fluid Mechanics Lab
- Refrigeration and Air conditioner Lab
- Heat Transfer Lab
- Strength of Material Lab
- MECHATRONICS
- Hyduralic and Pneumatics Lab
- Robotics and Auto Electronics Lab
- Mechatronics System Design Lab
- Mechatronics Lab
- PHYSICS
- SPECIAL PRODUCTS
- Robo
- Crystal Puller
- DCS
- X - Y Table
- Battery Testing
Copy@2005 www.vimicrosystems.com All rights reserved
THERMAL LAB TRAINERS
FOUR STROKE SINGLE CYLINDER DIESEL ENGINE TRAINER
- Make:Kirloskar(or) Equavalant
- No of Cylinder : 1
- Bare x Stroke : 87.5 x 80mm
- Cubic capacity : 481cm3
FOUR STROKE SINGLE CYLINDER PETROL ENGINE TRAINER
- Make : TVS
- Type : 4 stroke cycle, Air cooled OHC
- Number of cylinders : 1
- Piston displacement : 110 cc
- Bore Size : 53.5 mm
- Stroke : 48.8 mm
- Compression Ratio : 9.8:1
- Max Net Power : 6.1 Kw @7500 Rpm
- Max Net Torque : 8.1 Nm @5500 Rpm
STANDARD REFRIGERATION TRAINER
FOUR STROKE THREE CYLINDER PETROL ENGINE TRAINER
- 6 type of thermocouple provided to measure temperature at various points
- 4 Nos of pressure guage used to measure evaperator, condencer inlet, outlet pressure
- Thermostatic expansion valve and capillary tube are to calculate the C.O.P
- One heater to use the external load to refrigerator
- One energy meter to use
to calculate the C.O.P
and another energy meter
used to heater power consuption
- 134 A refrigerator is used to
this refrigerator
- Type : 4 stroke cycle,water cooled SOHC(IC2V
- Number of cylinders : 3Piston displacement : 796 cc
- Maximum output (Std.,AC) : 37 bhp at 5000rpm 59 Nm at 2500rpm
FOUR STROKE SINGLE CYLINDER PETROL CUT MODULE
FOUR STROKE TWIN CYLINDER DIESEL ENGINE TRAINER
- Make : TVS
- Type : 4 stroke cycle, Air cooled OHC
- Number of cylinders : 1
- Piston displacement : 110 cc
- Bore Size : 53.5 mm
- Stroke : 48.8 mm
- Compression Ratio : 9.8:1
- Max Net Power : 6.1 Kw @7500 Rpm
- Max Net Torque : 8.1 Nm @5500 Rpm
- Make : Kirloskar (or) Equavalant
- No of Cylinder : 2
- Rated output/Rpm : 13.3hp/1500
- Power : 3.7KW
- Cooling Type : AIR-cooled/ Hand Starting
- Fuel : Diesel
DATA ACQUISITION SYSTEM FOR IC ENGINE
- One 7Kg stepper motor for arm movement.
- One stepper motor (7Kg) for conveyor control.
- Conveyor Mechanism with timer pulley arrangement.
- One proximity sensor to detect the presence of material.
- Two limit switches to control Arm movement
- A Electromagnet in the arm to pick up the metal object.
FOUR STROKE SINGLE CYLINDER DIESEL ENGINE (VTC-01)
- Make : Kirloskar (or) Equavalant
- No of Cylinder : 1
- Bore x Stroke : 87.5 x 110mm
- Cubic capacity : 481cm3
- Compression ratio : 17.5:1
- Rated output/RPM : 6hp/1500
- Power : 4.4KW
- Cooling Type : Air cooled
- Fuel : Diesel
Leaders in Educational Trainers
Vi Microsystems